I have had my 622 since last November the more I use it the smarter it gets!

www://dishretailer.com/dpp/dpptwin.pfd

Using A 501 To Find & Peak 61.5 I Hooked My 501 Directly To The Dish 500 W/dp Dual Used Tp 10 Found And Peaked It In 5 Min. Put It All Back Together Did A Swich Check On The 622 And All Good! Thanks Dml

I do not know anything about the Superdish or what you can get with it. But for standard HD (119-110-61.5) use a Dish 500 w/DishPro Plus Twin LNBF - 119 & 110. A second Dish 500 w/DishPro Dual LNBF & an I bracket for 61.5. Go to the DishStore site and look around.

tony69nh What do you have for receivers

I recieved an I yoke with the 500. When trying to find 61.5 with the point dish screen (622) after 2 or 3 min. I will get a red bar and wrong sat. 119.

Yes

I pulled the 129 LNB off the 1000 and mounted it in the new 500 the DPP Twin is in the 1000 and working. Can I use the point dish in the 622 to FIND and peak 61.5 the same as 119? Or do I need a hand held @ the dish to find it? It sounds like I need a signal from 61.5 for the 622 to recognize...

I Have a 622 & 501 W/1000 and they work but, 129 is weak 30's to 50's with dropouts & lockup on the 622. Called Dish Store and orderd a 500 dish. Mounted the new dish pulled the 129 LNBF out of the 1000 installed it in the new one (same coax pulled it out of the 1000 arm & up the 500). Pointed...

Use your C band mast 3" to 31/2" diameter. Bend 5/16" threaded rod around the mast, large muffler clamp, drill out the 4 screw holes in the dish mount to 3/8". Clamp it down and use your C band coax.

I was told by E* that they get checked (autited) by there program suppliers and are made to prove that the second recevier, less $. is in the same residence (phone #) as the main one. The easy way to do that is to ping each reciever by phone. If...

Temps From A 622 Can I Get Temps From A 622?

It's worth the $ for the DH package just to have the cat jump up to the TV and demand that I change from GMA to DISC HD Sunrise in the AM

Thank you for the info DML

Thank You All For The Help! :hatsoff: The root cause of the "FAILED INSTALL" was legacy LNBF installed on a 1000 for 129 - Installers working in 10 deg. weather @ night and it was down hill from there. After two days and a try with - SW21, SW44, DP34, DP21, DPP/110-119 LNBF they never could get...