you were right, the scenario should work, I found one of the diplexers would cause fuzziness on the OTA and wouldn't carry voltage from one side to the other (using the old tongue test) I will visit my retailer and get another diplexer, and run a new cable for the back bedroom. Sorry I...

not witholding anything, I just have the one receiver, the splitter is to get OTA to the bedroom and the living room, don't need dish in the bedroom. I am using two pairs of diplexers because of physical locations, the sat-dish and bedroom are on one side and the sat-rcvr/living room on the...

I knew I made it too complicated, I am using two pairs of diplexers The OTA antenna is connected to a splitter, each side goes to a different pair of diplexers, the diplexer pairs are jumpered on the sat side where I had to use two for the antenna. I attached a rough diagram

OK, I went from the one eyed dual, to LNB IN on the two-eyed twin, then from "1" on the twin to the box, that worked, UNTIL I introduced the diplexers I am using to get from my OTA antenna to the bedroom. One of the diplexers is mounted touching a grounded splitter, could that be the problem...

actually, the dual lnbf is a dish pro plus, the "lnb in" side of it was connected to the single lnb on the other dish, the "2" side was connected to the house. so that leaves me a cable off the single lnb that I dont know what to do with. They left me a seperator, but I think that was to run two...

Last year I cancelled my dish network service, I had a dual tuner box with DVR (not HD) - They left Two Dish Pro 500 dishes, one has a Dual Digital LNBF and the other a single Digital LNBF. Service was working when cancelled. My wife has been bugging me to get service again, so I bought a Dish...