Anyone have a link to the latest firmware up date for the x2? The last one I have is 10-11-2012. Thanks

I miss my dsr 922:(

I dont know about this one. I figured out that I am doing what I am supposed to do but it cannot find the files on the usb stick. Also it can only find a few channels on g19 or g17 I think this one needs to go back. Before yall trash me to much I build my own computers and I had a homemade c...

Do you have a copy of the 10/11 file? I dont see it on the website.

Hey guys I know I need to upgrade this unit but after reading all this yall got me nervous. I downloaded the file onto a usb stick but its says to use a serial cable on the website. Can anyone do a walk through with me? As a old fart technology sometimes messes with my brain and I would hate to...

Well my bad I guess I wasted my money since the strong lnb did not work and the one that came with the dish does. The reason I went with the strong unit was the noise figure was 0.1 db compared to 0.5 for the geosat.

Well I got some life into it. Turns out the better lnb does not work. I put the el cheapo that came with the dish on and I started getting a signal at the receiver. I believe I found g16 as I have the pentagon channel on right now. Not much else on this bird. Tomorrow I will try to get g19. Thanks

I disconnected the motor it is not controlling anything. It is holding the dish but I set the angle of the dish mount to zero in reference to the motor angle and I am using the motor bracket to set the angle of 55 degrees. Basically It is invisible to the system. I could remove the motor from...

Ok here is what I did. Rotated the motor to zero. Ran coaxial straight to lnbf. Manually turned the dish to g 19, fine tuned signal strengh using the meter to 6. Nothing at the receiver zero signal. I am using this to tune the dish. http://www.amazon.com/dp/B000MTXFXS/?tag=satell01-20

I just checked and it is set to 22k. the diseqcis set to 1.2 usals that is my only option, Signal is at zero.

Ok I will start at the top. I have a universal single lnbf. This one. http://www.amazon.com/gp/product/B0089DYOCA/ref=oh_details_o02_s00_i01 And I have this motor. http://www.amazon.com/gp/product/B001O4YX6S/ref=oh_details_o00_s00_i00 and this dish...

Well I have my unit set up and I aimed it at galaxy 19. The sat finder shows a strong signal but I am not getting any signal according to the x2. I may not have it set up properly. I set the lnb at 10600 and the diseqc to 1.3 usals. and nothing. Do I have a bad box or just pilot error?

I am going to install a 36 inch motorized dish with a x2 receiver. How long can the coaxial cable be without losing signal? There is a perfect spot on top of my shop but the cable might end up being 100 ft.

Well good news! My receiver powered right up and I was able to go into the setup menu and read the unit id# so it must still be good. Now what about the lnbs? I have a c band and the ku band can I still use these?

Sounds good. I may go ahead and sell that dsr on ebay after all. I plugged it in earlier and if I get a chance I will hook it back up to make sure the battery didnt go dead on me.

Thanks for the reply, I called skyvision a while back and it sounded like c-band was dead so I just let it sit. Now I am glad I did. I got on ebay and found my old dsr-922 is selling for more than I bought it for. Who knew? LOL I always research the heck out of anything before I jump into it, so...

Hi newbie from TX here. I was searching google and found this forum. I have been a long time big dish user and finally went mainstream about 3 years ago with att uverse. So I still have my 10 ft unimesh dish and a dsr-922 receiver. I also have my old receiver that was analog. The wife wants this...