622 with a 6' & 8'dish help request

[steve car]

I know little about this stuff. my installer can't get my stuff hooked up correctly.

I have a 6' dish pointed at sat 61 & an 8'dish with 2 lnb's pointed at 119 & 121. while the signal is strong at 85% & the dishpro44 switch is now in, I got no signal with the 622hd when combining the 6' with the 8'dish.

beautiful when seperated but i'm limited to the 8'dish only at present.

do I need new connectors?

thanks in advance

 

[VinceT3]

my guess is the lnbs aren't dish pro.. you can switch to a legacy switch (SW64, SW44, or SW21) which should correct the issue if you're lnbs don't have the big dishpro logo on them..

 

[steve car]

my guess is the lnbs aren't dish pro.. you can switch to a legacy switch (SW64, SW44, or SW21) which should correct the issue if you're lnbs don't have the big dishpro logo on them..

thanks vince I'll check that out

 

[steve car]

all 3 lnb's are dishpro. any other thoughts?

 

[damjr]

You say you're pointing at the 119 & 121. Is this correct?